| RESPONSE
1SC | | |
 |
|
| DETAILS |
Nominal
Impedance: 8 ohms
Recommended Amplifiers: 20 to 100 watts
Frequency
Response: 38hz to 30Khz
Sensitivity: 86db linear for 1 watt at
1 metre
Bass/Midrange: New five inch unit with special transparent
cone. Copper magnet assembly and
phase plug mounted on die-cast chassis. High
temperature voice coil.
Tweeter: ProAc three quarter inch dome unit,
with honeycomb - wound voice coil. Special damping and ferrofluid-cooled coil
assembly.
Crossover: Finest components on dedicated circuit board.
Multistrand oxygen-free copper cable throughout. Split for optional bi-wiring
and bi-amping.
Dimensions:
12" (305mm) high
7" (178mm)
wide
9 1/4" (235mm) deep
Weight:18lbs (8kg)/cabinet
Mode:
Stand mounted
Grille: Acoustically transparent crimplene
Finish:
Available in the following real wood veneers: Black Ash, Maple, Cherry, Mahogany,
Ebony, Bird’s Eye Maple | | |
| RESPONSE
D15 | | |
 |
|
| DETAILS |
Nominal
Impedance: 8 ohms
Recommended Amplifiers: 20 to 180 watts
Frequency
Response: 30hz to 30Khz
Sensitivity: 88db linear for 1 watt at
1 metre
Bass/Midrange: Driver 6 1/2" diameter unit with new rigid
chassis, linear motor assembly and large copper magnet and phase plug. Glass fibre
weave cone exclusive to ProAc.
Tweeter: 3/4" soft dome exclusive
to ProAc with special honeycomb wound voice coil and rear chamber damping
Crossover:
Finest components on dedicated circuit board. Multistrand oxygen-free copper
cable throughout. Split for optional bi-wiring and bi-amping.
Dimensions:
38
3/4" (984mm) high on plinths with conical feet
7 1/2" (190mm) wide
10"
(254mm) deep
Weight: 50lbs (23kg/cabinet)
Mode: Floorstanding
Grille: Acoustically transparent crimplene
Finish: Available
in the following real wood veneers: Black Ash, Cherry, Mahogany, Ebony, Bird's
Eye Maple and Maple.. | | |
|
RESPONSE
D28
| | |
 |
|
| DETAILS |
Nominal
Impedance: 8 ohms
Recommended Amplifiers: 10 to 200 watts
Frequency
Response: 20hz to 30Khz
Sensitivity: 88db linear for 1 watt at
1 metre
Bass/Midrange: Driver 6 1/2" (165mm) ProAc unit with coated
polypropylene cone on die-cast chassis.
Tweeter: ProAc 1"(25mm)
soft dome with special surround and inner damping
Crossover: HQC crossover
using dedicated components wired throughout with multistrand oxygen-free cable.
Split for optional bi-wiring and bi-amping.
Dimensions:
42"
(1066mm) high on plinths with conical feet
8 3/4" (222mm) wide
10"
(254mm) deep
Weight: 57 lbs (26kg) /cabinet
Mode: Floorstanding
Grille: Acoustically transparent crimplene
Finish: Available
in the following real wood veneers: Black Ash, Maple, Mahogany, Cherry, Ebony,
Bird's Eye Maple and other finishes to special order. |
| |
|
RESPONSE
D38 | | |
 |
|
| DETAILS |
Nominal
Impedance: 4 ohms
Recommended Amplifiers: 10 to 250 watts
Frequency
Response: 20hz to 30Khz
Sensitivity: 90db linear for 1 watt at
1 metre
Bass/Midrange (2): Driver 6 1/2" (165mm) ProAc unit with
coated polypropylene cone on die-cast chassis
Tweeter: ProAc 1"
(25mm) soft dome with special surround and inner damping
Crossover:
HQC crossover using dedicated components and wired throughout with ProAc multistrand
oxygen-free copper cable. Split for optional bi-wiring and bi-amping.
Dimensions:
49"
(1244mm) high on plinths with conical feet
9 1/4 " (235mm) wide
13
1/2 " (343mm) deep
Weight: 88 lbs (40kg) /cabinet
Mode:
Floorstanding
Grille: Acoustically transparent crimplene
Finish:
Available in the following real wood veneers: Black Ash, Maple, Mahogany,
Cherry, Ebony, Bird's Eye Maple and other finishes to special order . |
| |
|
RESPONSE
D80 | | |
 |
|
| DETAILS |
Nominal
Impedance: 4 ohms
Recommended Amplifiers: 10 to 500 watts
Frequency
Response: 20hz to 30Khz
Sensitivity: 91db linear for 1 watt at
1 metre
Bass Driver (2): 8" professional drivers with specially
doped polypropylene cone.
Midrange Driver (2): 2" soft dome midrange
with dedicated rear chamber and heavy duty non-resonant front plate.
Tweeter:
1" soft dome with unique inner chamber and front plate.
Crossover:
Finest components on dedicated circuit board. Multistrand oxygen-free
copper cable throughout. Split for optional bi-wiring and bi-amping.
Dimensions:
54
1/2" (1384mm) high on plinths with spikes
10" (254mm) wide
15"
(381mm) deep
Weight: 121lbs (55kg) cabinet
Mode: Floorstanding
Grille: Acoustically transparent crimplene
Finish: Available
in the following real wood veneers: Black Ash, Maple, Mahogany, Cherry, Ebony,
Bird’s Eye Maple and Burr Oak. | |
|
| RESPONSE
D100 | | |
 |
|
| DETAILS |
Nominal
Impedance: 4 ohms
Recommended Amplifiers: 10 to 750 watts
Frequency
Response: 20hz to 30Khz
Sensitivity: 92db linear for 1 watt at
1 metre
Bass Driver (2): Professional quality long-throw 10” (254mm)
unit with large magnet assembly and 3” (75mm) ribbon wound voice coil
Midrange Driver (2): Studio quality 3” (75mm) soft dome unit with
double suspension
Tweeter: ProAc 1” (25mm) soft dome with special
surround and front plate
Crossover: HQC crossover using dedicated components
wired throughout with ProAc multistrand
oxygen-free copper cable. Split for
optional bi-wiring and bi-amping.
Dimensions:
65” (1650mm)
high on plinths with conical feet
12” (305mm) wide
19” (482mm)
deep
Weight: 289 lbs (131kg) /cabinet
Mode: Floorstanding
Grille: Acoustically transparent crimplene
Finish: Available
in the following real wood veneers: Black Ash, Maple, Mahogany, Cherry, Ebony,
Bird’s Eye Maple and Burr Oak. Other finishes to special order |
| | |
