| Shrimp
Preamplifier | | |
 |
|
| DETAILS |
| DIMENSIONS | 19
x 11 x 3 1/2 |
| WEIGHT
(lbs) | 15 |
| INPUT
IMPEDANCE | 250
Kohm | | OUTPUT
IMPEDANCE | 50
ohms | | FREQUENCY
RESPONSE | 10
Hz - 80 kHz |
| VACUUM
TUBES | Input
Tubes:
2 x 12AT7WA
Output Tubes:
2 x 7044 |
| INPUT
SENSITIVITY | 200
mV in yields 1V outs |
| S/N | typically
95 dB A WGT 20-20K |
| POWER
CONSUMPTION | 55
Watts (485mA @ 120 VAC) | | |
| Steelhead
Phono Stage | | |
 |
|
| DETAILS |
| CHASSIS
DIMENSIONS | Steelhead:
19 wide x 3.5 tall x 15.5 deep
PSU: 13.5 wide x 4.5 tall x 11.375 deep
| | WEIGHT
(lbs) | Steelhead:
15 lbs.
PSU: 18 lbs. |
| Minimum
mounting allocation footprint including all projecting parts and controls: | Steelhead:
19 wide x 4.125 tall x 18 deep
(allow an additional 6 inches depth for PSU
umbilical cord projecting out in the center)
PSU: 13.5 wide x 4.625 tall x
12.5 deep
(allow an additional 6 inches depth for PSU umbilical cord projecting
out in the left) | | |
| Neo-Classic
300B Preamplifier | | |
 |
| | |
| DETAILS |
| DIMENSIONS | W=19".
L=13". H=3 1/2" |
| WEIGHT
(lbs) | 28
Ibs | | INPUT
IMPEDANCE | 100
Kohm: Precision stepped attenuator |
| OUTPUT
IMPEDANCE | (LINE
STAGE): 100 ohms |
| FREQUENCY
RESPONSE | +-
1 dB: 5 Hz to 50 KHz |
| VACUUM
TUBES | 2
x 300B, 2 x 6SL7GT, 2 x 5AR4. 2 x 0D3 |
| POWER
CONSUMPTION | 170
Watts (1.4 A @ 120VAC) | | |
| The
WAVE 24/96 DAC/PREAMP Combo | | |
 |
|
| DETAILS |
FEATURES:
24 Bit 96KHz Digital
to Analog Converter Board
Totally
DUAL MONO design
Vacuum
tube output stage (2 x 12AX7, 2 x 7044)
BALANCED
and UNBALANCED outputs x 3
BALANCED
and UNBALANCED analog inputs x 4
Motorized
ALPS quad-attenuator volume control
4
x switchable digital input AES, SPDIF, ST, Toslink
1
x SPDIF digital output pass-through
4
x switchable ANALOG inputs balanced & unbalanced
Tape/Processor
Loop
Separate PSU
Remote Control
Dimensions:
19" W x 5.25" H x 13" D
Unit
weight WAVE = 23 lbs.; PSU = 15 lbs.
Shipping
weight: 49 lbs. | | |
