| SLP
308 | | |
 |
|
| DETAILS |
Weight:
15 lbs.
Dimensions: 6"
H x 16" W x 11" D
Circuit Type: Class
A Single-Ended
Gain Line Stage: 12
dB
Noise and
Hum: > 88 dB
below full output
Input Impedance:
100K Ohms
Output
Impedance: 440 Ohms
Frequency Response: 10
Hz to 50 KHz +/- 0.5 dB
Tubes: 2 - 12AU7
dual triode vacuum tubes
Power Transformer(s):
R-Core, 200% duty cycle
Wire: EE Teflon
Silver
Resistors:
1% Metal Film
Capacitors: Polypropylene
Power Supply:
Full wave rectified
feeding a Pi network and filter choke.
AC Cord: 3 conductor
shielded detachable
AC Power Requirements: 117
or 234 VAC @ 50/60 Hz according to market
Break-In Time: 100
hours of playing time
Finish: Black steel
chassis with black or silver anodized aluminum face plate, silver knobs, remote
volume control, tape monitor loop, 4 stereo input pairs, all RCA connectors for
inputs, outputs and the tape monitor loop, dual output level meters. |
| |
|
SLP-98P |
| |  |
|
| DETAILS |
Weight:
22 lbs.
Dimensions: 5"
H x 12.5" W x 12" D
Circuit
Type: Class A Triode
Output: 23
Volts
Gain Line
Stage: 20dB
Gain,
Phono Stage: 43
dB
Noise and
Hum: -88 dB below
full output
Input
Impedance: 50,000
Ohms - Line, 47,000 Ohms - Phono
Output Impedance: 400
Ohms
Frequency
Response: 5 Hz to
163,000 Hz
Tubes:
4 ea - 6SN7 Line
Stage
2 ea - 12AX7 Phono Stage
2 ea - 12AU7 Phono buffer
Power Transformer(s): EI
Laminate, 200% Duty Cycle
Resistors: 1% Metal
Film
Capacitors:
Polystyrene, Film
and Foil, (Optional Oil-Filled)
Power Supply Capacitors:
4 ea - 560µF@400 VDC
AC Cord: 3 Conductor
Detachable
AC
Power Requirements: 117/234
VAC @ 50/60 Hz
Consumption: 44
Watts - Operation
Warm-Up Time: 3
Minutes
Break-In
Time: 100 hours
of playing time
Finish:
Black Anodized Aluminum
Faceplate, Jaguar 'Carnival Red' with clear coat finish Steel Chassis faceplate
| | |
| SLP-98L |
| |  |
|
| DETAILS |
Weight:
22 lbs.
Dimensions:
5" H x 12.5"
W x 12" D
Circuit
Type: Class A Triode
Output: 23
Volts
Gain Line
Stage: 20 dB
Gain,
Phono Stage: 43
dB
Input Impedance:
50,000 Ohms - Line,
47,000 Ohms - Phono
Output
Impedance: 400 Ohms
Noise and Hum:
-88 dB below full
output
Frequency
Response: 5 Hz to
163,000 Hz
Tubes:
4 ea - 6SN7
Line Stage
2 ea - 12AX7 Phono Stage
2 ea - 12AU7 Phono buffer
Power
Transformer(s): EI
Laminate, 200% Duty Cycle
Resistors:
1% Metal Film
Capacitors:
Polystyrene, Film
and Foil, (Optional Oil-Filled)
Power
Supply Capacitors:
4 ea - 560µF@400 VDC
AC
Cord: 3 Conductor
Detachable
AC
Power Requirements: 117/234
VAC @ 50/60 Hz
Power
Consumption: 44
Watts - Operation
Warm-Up
Time: 3 Minutes
Break-In Time:
100 hours of music
playing time
Finish:
Black Anodized Aluminum
Faceplate,
Jaguar 'Carnival Red' with clear coat finish
Steel Chassis |
| |
|
SLP-05 |
| |  |
|
| DETAILS |
Weight:
20 lb. preamplifier,
20 lb. external power supply
Dimensions: 5"
H x 17" W x 12" D
Circuit
Type: Class A Triode
ZERO feed back design
Output:
2 volts rated, 23 Volts maximum
Gain
Line Stage: 20 dB
Gain, MM/MC Phono
Stage: 43 dB MM
or 68 dB MC section
Noise
and Hum: -90 dB
below full output (line stage)
Input
Impedance: 50,000
Ohms - Line level inputs
47,000
Ohms - Phono MM, 30, 100 or 330 Ohms- Phono MC
Output Impedance: 400
Ohms
Frequency
Response: 5 Hz to
163,000 Hz
Tubes:
6 ea. - 6SN7, balance and gain stages
4 ea. - 12AX7 Phono MM/MC stages
2
ea. - 12AU7 headphone amplifier
Power Transformer(s): EI
Laminate, 200% Duty Cycle
Resistors:
1% Metal Film
Capacitors: Polystyrene,
Film and Foil, (Optional copper oil and foil capacitors)
Power
Supply Capacitors: 4
ea. - 560µF@400 VDC
AC
Cord: 3 Conductor
Detachable
AC
Power Requirements: 117
or 234 Volts AC @ 50/60 Hz
Consumption:
75 Watts - Operation,
25 Standby
Warm-Up
Time: 3 Minutes
Break-In Time: 100
hours of playing time
Features
and Finish: Silver
color anodized aluminum faceplate, Jaguar 'Anthracite Black' clear coat finish
on a solid steel chassis. Variable MC cartridge loading with settings for 30,
100 or 330 ohms, remote volume control and muting, 1 Cinema Bypass, 1 tape monitor
loop, 1 XLR balanced stereo input, 3 RCA stereo inputs, 1 XLR balanced and 2 RCA
pairs of preamplifier outputs. External power supply with 5AR4 vacuum tube voltage
rectification. Timer warm up circuit allows the SLP 05 to be used safely with
rapid turn on solid state power amplifiers. The headphone power amplifier uses
12AU7 vacuum tubes for fantastic headphone listening!
| | |
| PH-302
MM/MC | | |
 |
|
| DETAILS |
Weight:
22 lb. ( 10 kg.)
Dimensions: 4"
H x 17" W x 13" D (~10 x 43 x 33 cm)
Circuit
Type: Direct Coupled,
Single Ended Class A
Gain, MM Phono Section: 38
dB using triode vacuum tubes
Gain, MC Phono Section: 54
dB, using input transformers and triode vacuum tubes
Noise and Hum: -78
dB below full output
Input Impedance: MM
47 k ohm, MC 100 ohm
Output Impedance: 660
Ohms
Frequency
Response: RIAA Curve
+ 0.5 dB, passive RIAA circuit design
Power Supply design and the type of Power Transformer: Fully
Regulated Power Supply with 1 ea. - R-Core transformer, 200% Duty rating for long
life and reserve energy
Vacuum Tube Complement:
2
ea. - 6SL7 Head Amp
2 ea. - 6SL7 RIAA EQ
& Amp Gain Stage
1 ea. -
5AR4 Vacuum Tube Rectifier
Power Supply Capacitors: 6
ea. - 47 µFd @ 350 VDC capacitor
Resistors:
1% Metal Film
Power Supply Capacitors: 6
ea. - 47 µFd @ 350 VDC capacitors
AC
Cord: 3 Conductor,
Detachable
AC
Power Requirements:
100,
117 or 234 Volts @ 50/60 Hz, set by market
Consumption: 15
Watts
Warm-Up
Time: 5 Minutes
Break-In Time:
100 hours of music
playing time
Finish: Black or
Silver anodized aluminum face plate,
semi gloss black steel chassis
| | | |
