| CD-306
SACD | | |
 |
|
| DETAILS |
Weight:
50 lb.
Dimensions:5" H x 18" W x 15" D
Transport:
SCD-1
Master Clock Jitter: Below measurable levels, with a digital
buffer circuit to eliminate jitter.
Digital Sample Rates (Fs): 44.1,
96, 192, 384, 512 or 768 kHz sample rates for CD playback to the analog audio
outputs, 44.1, 96 or 192 kHz Fs for digital inputs
Digital/Analog Converters:
8 Burr Brown PCM-1792u, four per channel
Analog Filter: 3rd Order
Bessel
Analog Outputs: Balanced XLR, Single-Ended RCA
Digital
Outputs:AES/EBU, Coaxial, Toslink (1 each)
Digital Input: AES/EBU, Coaxial,
Toslink (1 each)
Digital Input Sample Rate:32 kHz, 44.1 kHz, 48 kHz,
88.2 kHz, 96 kHz or 192 kHz, Accepts 16, 20, or 24 bits
Frequency Range:
2 Hz - 80 kHz (@ 192 kHz)
Amplitude Linearity: 0.1 dB (20 Hz - 20 kHz)
Phase Linearity: 3 degrees (20 Hz - 20 kHz)
Dynamic Range:
130 dB (1 kHz)
Signal-to-Noise Ratio: 133 (1 kHz)
Channel Separation:
110 (1 kHz)
Total Harmonic Distortion: 0.0008% (1 kHz) THD
Audio
Output Level: Single-Ended 3.0 Vrms
Balanced XLR 6.0 Vrms
Power
Input: Configured at the factory for 100-120 or 200-240 Volts AC @ 50-60Hz
Special Features: SACD playback stays in pure DSD format all the way to
the analog outputs. It is not converted to PCM in the CD 306 SACD player. ALL
aluminum chassis, with either silver or black anodized finish, top panel view
window for the drive mechanism and the inset bubble level balance, adjustable
metal cone feet, dual C-core transformer power supplies, fully regulated power
supply circuits, SACD stereo down mix from multi-channel SACD disks. HDCD decoding
at 44.1 kHz Fs, SACD, CD, HDCD playback. Rear panel RS-232 port control for remote
operation in custom installations, remote handset included.
Power Consumption:
Rated 35 watts during playback and 7 watts during standby operation. |
| |
|
CD-303/300 |
| |  |
|
| DETAILS |
Weight:
38 lbs.
Dimensions:
4" H x 18" W x 15" D
Transport: 3 Beam CD/DVD ROM drive
Frequency Response: 2 Hz - 384 kHz (768 kHz Fs)
Signal-to-Noise
Ratio: 127 dB (1 kHz)
Total Harmonic Distortion (THD): 0.004% (1
kHz)
Channel Separation: 109 dB (1 kHz)
Power Consumption:
60 Watts (15 standby)
Digital/Analog Converters (DAC): (2) Burr Brown
PCM1792u 24 bit DAC chip sets
Sample Rate Settings: (Fs) 44.1, 96,
192, 384, 512 or 768 kHz sample rates for CD, CD-R or CD-RW disk playback to the
analog output, digital output Fs of 44.1, 96 or 192 kHz
Audio Output Level:
Single-Ended 3.0 Vrms, Balanced XLR 6.0 Vrms
Analog Outputs: (1) pair
balanced via XLR connectors
(1) pair single-ended via RCA connectors
Features:
48 bit DSP digital buffer circuit, bubble level balance on the chassis top
panel, adjustable metal cone feet, variable analog volume control, vacuum tube
and solid state output sections with remote selection or front panel button, dimmer
light control for display, C-core power transformer, fully regulated power supplies,
RS 232 port control for custom installation systems, chssis top removable panel
above the 12AU7 vacuum tubes in the output stage, HDCD decoding with Cary DSP-300
digital filter
Digital Outputs: (1) Balanced, (1) Coaxial, (1) Toslink
Power Input: 100-120 or 200-240 VAC, 50-60 Hz
Finish: Black or Silver
Anodized Aluminum Faceplates, Black Epoxy Coated Steel Chassis, black anodized
cone feet | | |
| |
| DETAILS |
| HDCD
decoding, single CD playback at 44.1, 96, 192, 384, 512 or 768 kHz sample rates,
remotely selectable with the remote control handset or with a front panel button.
Digital buffer stage to eliminate jitter! 24 bit Burr Brown 1792 DAC chips used
for D/A conversion, C-core power transformer, fully regulated power supplies,
fully shielded drive mechanism, front panel and remote handset buttons for upsampling. |
| | |
