ANTHEM PRODUCTS
PROCESSOR /AMPLIFIERS
Cutting edge, Intuitive, Simple to use!
AVM 30 • AVM 40 • AVM 50 • Statement D2

PREAMPLIFIER SECTION
Input Impedance
20 k ohms
Output Impedance

Main-RCA
Other-RCA
XLR
300 ohms
51 ohms
600 ohms
Rated Input
2.0 Vrms
Maximum Input

6-Channel S/E
All Others
3.0 Vrms
5.3 Vrms
Rated Output (100k ohms load)
2.0 Vrms
Minimum Load
5k ohms
Maximum Output

RCA
XLR
6.3 Vrms
12.6 Vrms
Headphone Output
100 mW into 32 ohms @ 0.2% THD+N
Volume Range

Main
Zone 2/3 & Headphone
-95.5 dB to +31.5 dB (0.5 dB resolution)
-62.5 dB to +10.0 dB (1.25 dB resolution)
Bass Management

High-Pass Slope (Small Speaker Setting)
Low-Pass Slope (Subwoofer)
Crossover Frequency (Adjustable in 5 Hz Increments)
12 dB/octave (2nd order)
24 dB/octave (4th order)
25-160 Hz
Tone Control

Bass Turnover Frequency
Treble Turnover Frequency
Range
Filter Response Type
200 Hz
2 kHz
+/- 12 dB
Shelf
Channel Separation (at 1 kHz)
82 dB
Crosstalk Between Inputs (at 1 kHz)
86 dB
 
The Statement D2 Audio/Video Processor

The D2 is designed and built in North America, on the same state-of-the-art high-end platform as its critically acclaimed predecessor, the D1. However, this next-generation audio/video processor ushers in a new era of digital video performance. With the unparalleled flexibility you have come to expect from Anthem™ processors, it gives you the versatility AND adjustability you need to make all of your digital video components work together seamlessly. And the results are spectacular!

The improvement the D2 brings to 480i DVD picture quality is astounding — almost as remarkable as the clarity it brings to HD 1080i material. While on lower-resolution displays improvements are dramatic, on the new-generation of 1080p displays, picture quality is simply astonishing. And yes, in the hands of the D2, even Component Video material looks better!

Where the D1 was the ultimate high-end digital audio processor for the home, the D2 is the ultimate high-end audio PLUS broadcast-quality digital video processor.

ANALOG AUDIO SECTION
Input Impedance
20 k ohms
Output Impedance

Main-RCA
Other-RCA
XLR
300 ohms
51 ohms
600 ohms
Rated Input
2.0 Vrms
Maximum Input

5.3 Vrms
Rated Output (100k ohms load)
2.0 Vrms
Minimum Load
5k ohms
Maximum Output

RCA
XLR
6.3 Vrms
12.6 Vrms
Headphone Output
100 mW into 32 Ω at 0.2% THD+N
Volume Control Range

Main
Zone 2/3 & Headphone
-95.5 dB to +31.5 dB (0.5 dB resolution)
-62.5 dB to +10.0 dB (1.25 dB resolution)
Bass Management

High-Pass Slope (Small Speaker Setting)
Low-Pass Slope (Subwoofer)
Crossover Frequency (Adjustable in 5 Hz Increments)
12 dB/octave (2nd order)
24 dB/octave (4th order)
25-160 Hz
XLR Pin Configuration
Pin 1: Ground, Pin 2: Positive, Pin 3: Negative
Channel Separation (at 1 kHz)
82 dB
Crosstalk Between Inputs (at 1 kHz)
86 dB
 
:: Private Policy ::
:: Legal Notice ::
-----------------------------------------------------
© 2004-2005. Hi-Fi Asia Plus Inc. All Rights Reseved